Skip to content
GOLDENRefractories Pvt. Ltd.

Induction Furnace Lining Thickness: A Balancing Act

A thicker lining protects the coil but reduces capacity and efficiency. Learn the trade-offs and how wear is monitored.

FURNACE LINING

Lining thickness is set by the furnace design, and it is a compromise.

Why not just make it thicker?

  • A thicker wall leaves less room for metal, so capacity per heat drops.
  • The coil is further from the metal, which can reduce electrical efficiency.
  • More material is used at every reline.

Why not thinner?

  • Less protection between metal and coil.
  • Shorter campaigns before the wall reaches its minimum.
  • Less margin for cracks and erosion.

Follow the furnace maker

The furnace manufacturer specifies the former size and the minimum safe wall thickness. Use those figures.

Monitoring wear

  • Measure the inside diameter at set points after a fixed number of heats.
  • Watch the slag line, which usually wears fastest.
  • Use ground leak detection where fitted.
  • Track power per tonne.

Uneven wear

If one side wears faster, check former centring, ramming consistency and charging habits. Uneven wear is usually a process issue, not a material one.