Skip to content
GOLDENRefractories Pvt. Ltd.

Why Iron Is the Enemy of a Silica Lining

Small iron particles in ramming mass create weak spots in an induction furnace lining. See why magnetic separation matters.

50 KGPROCESS & PRACTICE

Silica ramming mass is meant to be almost pure silica. One of the most harmful impurities is iron, whether as metal particles or as iron oxide.

Where iron comes from

  • Natural iron staining in the quartz.
  • Wear from crushers, screens and conveyors.
  • Contamination during storage and handling at site.

Why it matters

Iron and iron oxide lower the melting point of the material around them. In a lining, a speck of iron can become a spot where the wall softens, melts or reacts early. Metallic iron can also affect how the induction field heats the wall locally.

How suppliers remove it

  • Rejecting stained stone at the selection stage.
  • Washing and sorting.
  • Passing crushed material over magnets, often more than once, to pull out tramp iron.
  • Testing for iron oxide content in finished batches.

What you can do at site

  • Keep bags closed until use.
  • Never ram with tools that shed rust or scale into the mass.
  • Keep the area around the furnace clean during relining.
  • Do not reuse old mass that has picked up metal.

Questions to ask

Ask your supplier how iron is removed and what iron oxide level they target for the grade. A good supplier will answer clearly.