Ramming Mass Glossary: 25 Terms Every Melt Shop Uses
A plain-language glossary of induction furnace lining terms, from binder and former to sintering and slag line.
A quick reference for the words used around induction furnace linings.
Material terms
- Ramming mass: dry granular refractory installed by ramming or vibrating.
- Silica / SiO₂: the main component of acidic ramming mass.
- Quartzite: a hard rock made mostly of quartz grains.
- Binder: an additive that helps the lining sinter, usually boric acid or boron oxide.
- Boric acid (H₃BO₃): a common binder that turns into boron oxide when heated.
- Boron oxide (B₂O₃): the active binding phase, used directly in some grades.
- Premix: ramming mass supplied with binder already mixed in.
- Non-premix: ramming mass supplied without binder.
- Granulometry: the grain size distribution of the mass.
- Fines: the smallest particles in the mix.
Furnace terms
- Coreless induction furnace: a furnace with a coil around a crucible, no core.
- Coil: the water-cooled copper conductor that creates the induction field.
- Coil grout: the cement layer protecting the coil.
- Former: the steel shell that shapes the lining during ramming.
- Crucible: the lined space that holds the metal.
- Nali / spout: where metal pours out.
- Slag line: the band where slag sits; often the fastest-wearing part.
Lining terms
- Sintering: bonding grains together by heat.
- Sintered zone: the dense hot face.
- Fritted zone: the partly bonded middle layer.
- Loose zone: the unsintered back layer near the coil.
- Campaign: the number of heats a lining lasts.
- Penetration: metal entering cracks or pores in the lining.
- Ground leak detector: a system that warns when metal approaches the coil.
- Relining: removing the old lining and installing a new one.