Skip to content
GOLDENRefractories Pvt. Ltd.

Safety During Furnace Relining: Silica Dust and More

Relining an induction furnace exposes workers to silica dust, heat and heavy lifting. Practical safety steps for melt shops.

BUYER GUIDES

Relining is routine work, but it carries real hazards. A good safety routine protects your team and your furnace.

Silica dust

Fine crystalline silica dust can damage the lungs when breathed in over time, and long exposure is linked to silicosis.

  • Use proper respirators rated for fine dust, fitted correctly.
  • Reduce dust at the source: pour gently and avoid dry sweeping.
  • Use local ventilation where possible.
  • Keep people who are not involved away from the area.

Electrical and water

  • Isolate and lock out furnace power before anyone works inside.
  • Confirm coil cooling water status according to procedure.
  • Check the coil for leaks before ramming.

Heat and breakout

  • Break out old linings only after adequate cooling.
  • Use protective clothing, face shields and gloves.

Lifting and handling

  • Use proper lifting gear for the former and bags.
  • Train staff on safe manual handling of heavy bags.

Wet material near molten metal

Water and molten metal together can cause violent explosions. Keep everything near the furnace dry, including charge material and tools.

Safety rules from your furnace maker, local regulations and your own plant procedures always come first.