Skip to content
GOLDENRefractories Pvt. Ltd.

How to Store Ramming Mass So It Stays Dry

Moisture is one of the main reasons ramming mass linings crack. Simple storage rules keep your stock in good condition.

BUYER GUIDES

Silica ramming mass is installed dry, and it should stay dry until it goes into the furnace. Moisture causes steam during sintering, and steam causes cracks.

Store it right

  • Keep bags indoors, under a roof, with walls that keep rain out.
  • Stack on pallets, not directly on the floor.
  • Keep away from water lines, cooling towers and wash areas.
  • Cover stacks during the monsoon even when indoors.

Rotate stock

Use the oldest bags first. Mark the arrival date on each lot.

Handle carefully

  • Do not tear bags with hooks.
  • Re-seal opened bags if they are not used the same day.
  • Do not pour mass onto a wet floor or into a damp furnace.

Before ramming

  • Make sure the furnace, coil grout and insulation are dry.
  • Check that tools are dry and clean.
  • If a bag feels lumpy or damp, set it aside and ask your supplier.

Monsoon tip

In Chhattisgarh's monsoon months, humidity is high. Order closer to when you need the material, and keep a smaller buffer stock.